Alamo SL60 manual Skid Steer Requirements and Capabilities, Rops and Seat Belt

OPERATION

3. SKID STEER REQUIREMENTS

Skid Steer Requirements and Capabilities

•ASAE approved Roll-Over Operator Protective Structure and Seatbelt.

•	Operator Protective Door	Contact authorized skid steer dealer for equipping unit with
		operator protective door.
• Skid Steer Warning Equipment		Slow Moving Vehicle (SMV) emblem, proper lighting
•	Hitch	Universal Mount, Quick Hitch
•	Front Auxiliary Hydraulics	Mower drive motors must be matched with the hydraulic output
	Mower Drive Motors:	capacity of the skid steer
	Low Volume	For Systems Delivering 11-14 GPM at 1500-3000 PSI;
		105 ft./lbs. Torque at 2500 PSI
	Medium Volume	For Systems Delivering 15-19 GPM at 1500-3000 PSI;
		127 ft./lbs. Torque at 2500 PSI
	High Volume	For Systems Delivering 20-25 GPM at 1500-3000 PSI;
		153 ft./lbs. Torque at 2500 PSI

3.1 ROPS and Seat Belt

The tractor must be equipped with a Roll-Over-Protective-Structure (ROPS) (tractor cab or roll-bar) and seat belt to protect the operator from falling off the tractor, especially during a roll over where the driver could be crushed and killed. Only operate the tractor with the ROPS in the raised position and seat belt fastened. Tractor model not equipped with a ROPS and seat belt should have these life saving features installed by an authorized dealer. OPS-U- 0003

Operate this Equipment only with a Power Unit equipped with an approved operator Roll-Over Protective Structure (ROPS). Always wear seat belts. Serious injury or even death could result from falling off the Power Unit--particularly during a turnover when the operator could be pinned under the Operator Protective Structure. (SPU-14)

SL60 03/08 Operation Section 4-5

© 2008 Alamo Group Inc

OPERATION