To place an AD call

1Press the selected <AD xxxxx>.

[ringback tone]

•The call is automatically dialed.

Note: Before you can use this feature, AD buttons must first be assigned by your system manager.

A programmed number in your personal list can be up to 24 digits and characters. You can also program a number on an Automatic Dialing button that is not stored in your personal list. This programmed number can be up to 16 digits and characters. Each digit counts as one character; special characters, such as pause and suppress, count as two characters. The Automatic Dialing button can be used for one-touch dialing of frequently called numbers.

To program or reprogram an outside number, extension, or feature code into a personal list

1On a separate sheet of paper, write down the outside numbers, extensions, and/or feature access codes you want to program as items on your personal lists(s).

Note: Each telephone number or feature code is stored as a separate list item.

2Pick up the handset.

[dial tone]

3Press <Menu> and then press the softkey below Prog.

or press <Program> or dial the Program Personal List code *01.

[dial tone]

4Dial the list item (0, 1, 2…).

[dial tone]

5Dial the number you want to store (up to 24 digits).

Note: You may be able to use the softkeys to add special features such as Pause, Mark, or Wait into the telephone numbers programmed on the AD button.

If you are programming an outside number, be sure to include a trunk code, if applicable.

6Press <#>.

[confirmation tone]

•The number is stored.

7Repeat Steps 5 through 7 if you want to program additional items.

9Hang up or press <Drop> to end programming.

Note: Keep a copy of your own personal lists.

To place a call using an AD list button or code 1 Press <Pers List>

[dial tone]

or dial the Personal List feature access code *7

2Dial the desired list item (0, 1, 2…).

10