The ringing pattern you are hearing is displayed.

Note: You can also press <Next> or <Prev> to cycle through all eight ringing patterns.

3If you want to save the ringing pattern currently being played, do not press <Ring> anymore. You will hear the selected ringing pattern two more times, and then it will automatically be saved.

You hear confirmation tone (two rising tones).

The red light next to <Ring> goes off.

Note: If you receive a call, go off-hook, or lose power during selection, the process is interrupted and you must start again.

Self-Test

To test the lights and the display on your telephone

1While on-hook or off-hook, press and hold <Test>.

The green light next to <Test> goes on.

Note: If the green light next to <Test> flashes rather than goes on steadily, it means the telephone is not communicating with the switch. In such a case, call the Helpdesk at x2964.

The lights go on steadily in four groups, and the display fills in all the segments.

2To end test, release <Test>.

The lights return to the pretest state; the green light next to <Test> goes off.

Note: If the display or the lights do not respond during the test, call the Helpdesk at x2964 to open a trouble ticket.

Send All Calls

You can access this feature with the softkeys only if the feature's abbreviation, SAC, appears on the second line of one of the feature option screens.

To send all calls immediately to coverage (if your system manager has provided a coverage path for your extension)

1While on-hook, press <Menu> and then press the softkey below SAC or, if SAC is not available on your display, press <Send Calls> (while on-hook) or dial the Send All Calls code *3 (while off-hook).

[confirmation tone]

Note: You may hear a ring-ping tone from your telephone as each call is redirected.

20

Page 20
Image 20
Alcatel 8410D manual Self-Test, Send All Calls, To test the lights and the display on your telephone