To see the date and time
1Press <Menu> and then press the softkey below TmDay or, if TmDay is not available on your display, press <Date/Time>.
• The display returns to Normal Mode after a few seconds.
Note: The telephone gets this information automatically, you will not need to set it.
Timer
You can access this feature with the softkeys only if the feature name, Timer, appears on the second line of one of the feature option screens.
To see elapsed time (hours, minutes, seconds)
1Press <Menu> and then press the softkey below Timer or, if Timer is not available on your display, press <Timer>.
•The elapsed time is shown.
2To stop the timer and clear the display, press <Menu> and then press the softkey below Timer again or, if Timer is not available on your display, press <Timer> again.
•The elapsed time is displayed on the screen for about four seconds and then disappears.
Transfer
To send the present call to another extension or outside number 1 Press <Transfer>.
[dial tone]
•The present call is put on hold and the green light next to the held call flutters.
•You are given a new call appearance.
2Dial the number to which the call is to be transferred.
[ringback tone]
3Remain on the line and announce the call; if there is no answer or the line is busy, return to the held call by pressing its <xxxxx>.
4Press <Transfer> again.
• The call is sent to dialed number.
5Hang up.
23