Display, Softkeys, and Control Buttons
Entering Softkey Mode and Viewing the Three Feature Option Screens
There are three separate feature option screens. Each of these screens allows you to select from four different features.
You can enter Softkey Mode by pressing the display option button labeled <Menu>. The following is an example of a feature option screen.
Prog | Pause | Mark | Wait |
The top line of each feature option screen shows you the status of each of the four features. An arrow appears above the feature name or abbreviation if that feature is active. If there is no arrow above the feature, the feature is not active.
Note: If the feature requires you to dial a telephone number or extension, such as Call Forwarding, you will temporarily see the digits you are dialing, rather than the arrow, above the feature name.
The second line on each feature option screen shows the features you can access. To use any of these features, you must press the softkey below the feature name or abbreviation. For example, on the feature option screen shown previously, you can insert a .5 second pause (or multiple pauses) into an autodial number by pressing the softkey below Pause during programming. Pressing the Pause softkey repeatedly will insert a longer pause.
To see the next set of four features, press the display control button labeled <Next>; to move back a screen, press the display control button labeled <Prev>. Press <Next> or <Prev> until the feature you want to use appears on the second line.
Note: An error tone (one beep) sounds when you have made a mistake in your softkey entries.
Press <Exit> at any time to exit softkey mode and return to Normal
Other Softkey Features That May Be On Your Display
Other options that might be available on your softmenu are
Abbreviation | Feature |
AD | Abbreviated Dialing (can be multiple buttons) |
AutoCB | Automatic Callback |
CFrwd | Call Forwarding All Calls |
Cnslt | Consult |
Count | ACD Stroke Count (can be up to 10 buttons) |
CPkUp | Call Pickup |
Dir | Directory* |
Excl | Manual Exclusion |
HFAns | Internal Auto Answer |
Inspt | Inspect |
Last | Last Number Dialed |
RngOf | Ringer Off |
SAC | Send All Calls |
SFunc | Abbreviated Dialed Special Function |
15
