Preparing to Create Your First PolicyUsing the 8950 AAA Policy Assistant in Server
Management Tool
................................................................................................................................... .........................................................................................................................
365-360-001R6.0
Issue 1, December 2008 9-3
.................................................................................................................................... ........................................................................................................................
Preparing to Create Your First Policy
Opening the PolicyAssistant
The following sections describe how to configure the 8950 AAA PolicyAsssistant.
As explained earlier in Chapter 3, “Server Management Tool Command Set,” only one of
the Policy functions, either the PolicyFlow Editor or PolicyAssistant, can be operated at a
time. Please refer to this section/chapter to toggle between these two functions.
If you elect to work with the Policy Assistant panel and take the necessary actions, the
Policy Assistant item is displayed in the Navigation pane under Configuration Tools as
shown in Figure 9-1.
Figure 9-1 Navigation Pane–PolicyAssistant option
To open the Policy Assistant, click PolicyAssistant in the SMT Navigation pane as shown
in Figure 9-1.
Result: The PolicyAssistant Welcome panel appears. If this is the first time you have
accessed the PolicyAssistant (or if you have not previously saved a policy from this
panel) you will see a Welcome message as shown in Figure9-2.
The PolicyAssistant option
in the Navigation pane