.................................................................................................................................... ........................................................................................................................
Policy Se rver tabManaging 8950 AAA Servers
4-18 365-360-001R6.0
Issue 1, December 2008
.................................................................................................................................... ........................................................................................................................
Table4-11 lists the configurable entities of this panel.Table 4-11 Diameter Properties panel–Properties
Configurable Properties Description
Diameter Address Sets the listen addresses for diameter requests. This
value is a comma separated list of address:port values. If
address is omitted, it is assumed to be *. If the port is
omitted, it defaults to 3868. Default value is *:3868. If
this property is not defined or set to zero (0) diameter
requests will not be processed.
Origin Realm Specifies the origin realm.
Origin Host Specifies the origin host. Useful when testing diameter
when no outside network connection is available.
Peer Socket Timeout Specifies the amount of time (in milliseconds) allowed
before generating a peer state machine ‘Timeout’ event
as defined in RFC-3588, paragraph 5.6, during
connection establishment with a remote peer. As an
example, when an initiating peer attempts to connect to
a remote peer in the Closed state, it starts a timer
simultaneously with the connection request being sent.
Then, in ‘Wait-Conn-Ack’, the state that follows Closed,
a Timeout event is generated if no other event intervenes
and the connection state is brought back to Closed while
noting the peer as unavailable.
Peer Idle Timeout Specifies the time in milliseconds the peer is timed out if
idle.
Peer Idle Holdoff Specifies the time in milliseconds before a peer is failed
back after being suspended (if it was failed over at the
time of suspension). Peers are getting suspended as a
result of an idle-timeout, either on the local side or by
the remote server requesting a connection shut down.
Without this time-out and no extended requests,
suspended peers would be kept in the failed over state
indefinitely if they were failed over when asked to
suspend.