.................................................................................................................................... ........................................................................................................................
Log Channel Configuration Panel TabsMessage Logging
16-14 365-360-001R6.0
Issue 1, December 2008
.................................................................................................................................... ........................................................................................................................
Important! If you specify that this is the default channel, the channel currently
marked as the default, if any, will be changed to not be the default channel.
If the channel cannot log the message to the channel, it normally writes the message to
standard out and continues. If you want have an alternate channel to be used when
errors occur writing log messages to this channel, specify it in the Channel to use if
Error Occurs field.
6. After selecting the required channel(s), click Next.
Result: A message appears indicating that channel configuration is complete.
7. Click Back to modify any values or Finish to return to the Log Channels panel.
8. Click Save to store your channel configurations to the server.
Click Close to remove the panel.
Log Channel additions and changes take affect the next time you start the 8950 AAA
server.
Log Channel Configuration Panel TabsAbout the Tabs in the Log Channel Configuration Panel
The three tabs within the variable section of the Log Channel Configuration panel are as
follows:
•Properties–Basic information used for configuring this channel.
•Advanced–Additional fields that may be used to configure the channel.
•Documentation–Description of each property that appears in the Properties and
Advanced tabs. The documentation tab provides a list of field names and a text area as
shown in Figure 16-10. Select a field to display its description.