Alesis QS7, QS8 manual Configuration #2 2 Reverbs

Chapter 7: Editing Effects

CONFIGURATION #2: 2 REVERBS

Delay 1	Pitch 1	Reverb 1
Mono delay	Mono chorus	Plate 1
	Stereo chorus	Plate 2
		Room
		Hall
		Large
		Gate
		Reverse
		Reverb 2
		Level to Reverb	1
	Pitch 3	Reverb 3
	Mono chorus	Plate 1
		Plate 2
		Room
		Hall
		Large
		Gate
		Reverse
		Reverb 4
		Reverb 4
		Level to Reverb 3

This Configuration differs from Configuration #1 in many ways. In this Configuration, there is only one Delay effect, two Pitch effects and two Reverb effects. Effect send 1 is routed through the mono Delay, then a stereo Pitch effect, and finally a stereo Reverb effect. Send 2 has no effects of its own, but can be routed to the same Reverb effect as send 1. Send 3 is routed through a mono Pitch effect, and then a stereo Reverb effect. Send 4 has no effects of its own, but can be routed to the same Reverb effect as send 3.

Effect send 1’s Delay, Pitch, and Reverb can feed the Mix output directly. Unlike the first configuration, however, Pitch 3 can be routed to the Mix only after passing through Reverb 3.

94 QS7/QS8 Reference Manual