Alesis QS8, QS7 manual This selects Mix Play Mode

Overview: Chapter 4

To audition Programs before overwriting them with STORE …when editing a Program in Mix Play Mode:

¿While in Mix Program Edit mode, press [PROGRAM].

This selects Program Play Mode, retaining your edits to the Program in Mix Edit.

¡Use the [ BANK] and [BANK] buttons to select the User Bank. If a RAM card is inserted, use the [ BANK] and [BANK] buttons to select a Card Bank.

¬Use the [s VALUE] and [VALUE t] buttons or move the CONTROLLER [D] slider to scroll through the Programs until you find one you wish to overwrite with the new edited Program. Take note of the number.

√Press [MIX].

This recalls the edit buffer in Mix Mode, which contains your edited Program.

ƒPress [EDIT SELECT] twice, until “EDITING: PROGRAM” appears under the MIX number in the display.

≈Press [STORE].

The top line of the display will read “SavePrg? (STORE) to USERxxx” where XXX is a User Program number from 000—127.

ΔOptional: If the location you noted was on a RAM card, use [BANK] to select the Card Bank.

«Press [PAGE] to advance the cursor to the Program Number field in the display.

»Use the [s VALUE] and [VALUE t] buttons or move the CONTROLLER [D] slider to select the Program Number you noted in step 5.

«Press [STORE] again.

The Program is now stored.

At this point your edited Program is stored, however the Mix your were auditioning before storing the Program still has the old Program number assigned (if the edited Program was saved to a different Program number location). Therefore, you need to store the Mix as well.

»Press [MIX].

This selects Mix Play Mode.

…Press [STORE] twice. The Mix is now stored.

QS7/QS8 Reference Manual 39