Alesis QS8, QS7 manual Copying Sounds Between Programs, Copying Effects Between Programs

Overview: Chapter 4

COPYING SOUNDS BETWEEN PROGRAMS

Follow the steps below to copy one of the four Sound layers from one Program to another Program in the User Bank. When copying Sounds between Programs, the "new" Sound will replace the same numbered Sound in the destination Program, i.e., Sound 3 will replace Sound 3.

¿Press [PROGRAM] to select Program Play Mode, then use the [s VALUE] and

[VALUE t] buttons to select the Program Number that uses the Sound you want to copy. If necessary, use the [ BANK] and [BANK] buttons to select a different Bank.

¡Press [STORE].

¬Press [PAGE] once to advance to Page 2.

The upper section of the display will read “COPY SOUND 1”.

√Use the [s VALUE] and [t VALUE] buttons to select which Sound (1–4) you wish to copy from the currently select Program.

ƒPress [PAGE] once to advance the cursor to the Program number value in the lower section of the display.

≈Use the [s VALUE] and [VALUE t] buttons or move the CONTROLLER [D] slider to select the Program Number in the User Bank you wish to copy the Sound to (000–127). Or, you may copy into any of the four Sounds of the source Program (Sound 1-4).

ΔPress [STORE] to complete the copy function.

COPYING EFFECTS BETWEEN PROGRAMS

Follow the steps below to copy the Effects from one Program to another Program in the User Bank.

¿Press [PROGRAM] to select Program Play Mode, then use the [s VALUE] and

[VALUE t] buttons to select the Program Number that uses the Effects you want to copy. If necessary, use the [ BANK] and [BANK] buttons to select a different Bank.

¡Press [STORE].

¬Press [PAGE] once to advance to Page 2.

The upper section of the display will read “COPY SOUND 1”.

√Press the [s VALUE] button four times until the display reads “COPY EFFECT”. This selects the Effects of the currently selected Program as the source of what is to be copied.

ƒPress [PAGE] once to advance the cursor to the Program number value in the lower section of the display.

≈Use the [s VALUE] and [VALUE t] buttons or move the CONTROLLER [D] slider to select the Program Number in the User Bank you wish to copy the Effects to (000–127).

ΔPress [STORE] to complete the copy function.

QS7/QS8 Reference Manual 37