Alienware Upgrading the Hard Disk Drive, Alienware Area-51 m5550 Technical Reference

Models: m5550

1 92
Download 92 pages 27.07 Kb
Page 57
Image 57
Upgrading the Hard Disk Drive

Alienware Area-51 m5550 Technical Reference

Warning: We strongly recommend that you send your notebook back to your dealer or agent for the specification upgrading.

When you upgrade your system, please turn off the power and disconnect the LAN and Modem cable first for your safety.

After the system upgrade, please screw all the screws in before turning on the system.

Upgrading the Hard Disk Drive

Replacing the original drive with one of larger capacity can increase the hard drive capacity of your computer. The computer uses a 9.5 mm (height), 2.5-inch Serial ATA type hard disk.

Be sure to make a backup copy of all your data before attempting this operation.

Warning: A hard drive upgrade is a delicate process. Please observe the following instructions carefully or have a qualified technician install it for you. Damages due to mishandling of this procedure are NOT covered by the manufacturer’s warranty.

Warning: Apply care when handling the hard disk.

Do not drop or apply any shock.

Do not press on the cover.

Do not touch the connector with your fingertips.

Mishandling of the hard drive can result in permanent loss of data. Make a backup copy of the drive’s content before you remove it.

Note: Certain models that come with the IBM-brand hard drive emit a clattering sound when it is being rattled. This is a normal condition.

57

m5550-04-2007-techref.indd 57

4/6/2007 12:29:51 PM

Page 57
Image 57
Alienware user manual Upgrading the Hard Disk Drive, Alienware Area-51 m5550 Technical Reference