Installation

Before You StartTools

For most installations, the basic tools you will need are:

1

2

3

5

4

D818I

1Wrench

2Screwdrivers

3Level

4Teflon Tape

5Duct Tape

Figure 7

Gas

Dryer is equipped for Natural Gas with a 3/8" N.P.T. gas supply connection. For more detailed information, refer to section on Gas Requirements.

Location

Place the dryer on a solid floor with an adequate air supply. For more detailed information, refer to section on Location Requirements.

Exhaust

Use rigid metal duct and exhaust the dryer to the outside by the shortest route possible.

D333I

Figure 8

NOTE: For more detailed information, refer to section on Dryer Exhaust Requirements.

Electrical●ELECTRIC DRYER

Dryer needs a 3 or 4 wire 120/240 or 120/208 Volt, 60 Hertz, 30 Amp, AC single Phase electrical supply.

●GAS DRYER

Dryer needs a 120 Volt, 60 Hertz, 15 Amp, polarized 3-slot effectively grounded receptacle.

NOTE: For more detailed information, refer to section on Electrical Requirements.

❂

16

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

510969