Preventive Maintenance Instructions

WARNING

To reduce the risk of electric shock, fire, explosion, serious injury or death:

•Disconnect electric power to the tumbler before servicing.

•Close gas shut-off valve to gas tumbler before servicing.

•Close steam valve to steam tumbler before servicing.

•Never start the tumbler with any guards/panels removed.

•Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumbler is properly grounded.

W002

Daily

Lint Removal

WARNING

To reduce the risk of serious injury, do not open the lint panel while the tumbler is in operation. Before cleaning the lint screen, open tumbler door and allow cylinder to completely stop.

W410

1.Unlock the lint drawer and remove it. Refer to Figure 15.

2.Remove all accumulated lint in the lint compartment area by tipping the drawer over a garbage collection can or similar container.

3.Be sure the lint screen is not torn. If it is, replace immediately. A torn screen allows lint to pass from the tumbler to the ductwork system creating a restriction to air circulation or adversely affecting the recirculation function of the tumbler. Both affect machine efficiency.

4.The lint screen is designed to completely cover the entire opening in the angled section of the lint drawer. Be sure that it does so. Excessive gaps between the lint screen and the lint drawer allows lint to pass into the ductwork system.

5.Wipe any accumulated lint from the lint drawer compartment area. Failure to do so will allow a buildup of lint in this area.

6.Reinstall the lint drawer, ensuring a tight fit and lock.

IMPORTANT: Failure to lock lint drawer will result in the tumbler not starting.

Monthly

Lubrication

Motor bearings, fan bearings, cylinder bearings and cylinder roller bearings are pre-lubricated sealed bearings and require no lubrication.

Lint Removal

Remove the exhaust duct from exhaust thimble and remove lint. If excessive lint is evident at the thimble, further disassemble the duct work and remove lint. Also, remove blower housing assembly from cabinet and remove any lint present in blower housing or on fan.

M412060

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

33