IMPORTANT: Warranty is void unless drying tumbler is installed according to instructions in this manual. Compliance with minimum specifications and requirements detailed herein, and with applicable local gas fitting regulations, municipal building codes, water supply regulations, electrical wiring regulations, and any other relevant statutory regulations. Because of varied requirements, applicable local codes should be thoroughly understood and all pre-installation work arranged for accordingly.

In the U.S.A. installation must conform to the latest edition of the American National Standard Z223.1 “National Fuel Gas Code” and Standard ANSI/NFPA 70 “National Electric Code”.

In Canada installation must comply with Standards CAN1-B149.1 or CAN1-B149.2 codes for gas burning appliances and equipment and CSA C22.1, latest edition, Canadian Electric Code, Part I. Steam models are not certified by the Canadian Gas Association. The 150 lb. models are not certified by the Canadian Gas Association.

In Australia installation must comply with the Australian Gas Association Installation Code for Gas Burning Appliances and Equipment. The 150 lb. models are not certified in Australia.

WARNING

Failure to install, maintain, and/or operate this machine according to manufacturer’s instructions may result in conditions which can produce serious injury, death and/or property damage.

W644

WARNING

To reduce the risk of fire, electrical shock, serious injury or death to persons, do not operate tumbler if it does not perform according to these instructions. Immediately disconnect electrical service, shut off gas supply, and contact an authorized service representative. Service and repairs are to be performed by authorized service representatives only.

W645

NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and carefulness are factors which CANNOT be built into this tumbler. These factors MUST BE supplied by the person(s) installing, maintaining, or operating the tumbler.

Always contact your dealer, distributor, service agent or the manufacturer on any problems or conditions you do not understand.

Information For Handy Reference

Date Purchased

 

Model No.

 

Serial No.

Dealer’s Name

NOTICE: For your own convenience and protection, record the above information and retain your sales slip for this appliance. The model and serial numbers will be found on the serial plate located at the rear of the tumbler. Refer to page 7.

2

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

M412060