Installation
Thread hose couplings onto valve connections finger- tight, then approximately
1/4 turn with pliers. DO NOT cross thread or overtighten couplings.
Turn water on and check for leaks. If leaks are found, retighten the hose couplings. Continue tightening and rechecking until no leaks are found.
1
COLD
HOT
3
2
4 
TLW1976N
1Water Faucet
2Fill Hoses
3Rubber Washer (Plain)
4Filter Screens
Figure 4
2 1
WATER
MIXING
VALVE
4 | 3 |
SWD631N
1Water Supply Faucets
2Cold Water Connection
3Hot Water Connection
4Water Fill Hoses
Figure 5
IMPORTANT: Hoses and other natural rubber parts deteriorate after extended use. Hoses may develop cracks, blisters or material wear from the temperature and constant high pressure they are subjected to.
All hoses should be checked on a yearly basis for any visible signs of deterioration. Any hose showing the signs of deterioration listed above should be replaced immediately. All hoses should be replaced every five years.
18 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 801539 |