Location Requirements
Select a location with a solid, sturdy and level floor. DO NOT install unit on carpeting, soft tile, pedestal, a platform or other weakly supported structures.
The unit must not be installed or stored in an area where it will be exposed to water and/or weather.
All four legs must rest firmly on the floor so the weight of the unit is evenly distributed. The unit must not rock and must be level from
Installation
IMPORTANT: Unless completely assembled, DO NOT slide the unit across the floor. DO NOT slide the unit more than four feet once the leveling legs have been extended, as the legs and the base could become damaged.
The unit needs sufficient clearance and an adequate air supply for proper operation and ventilation, and for easier installation and servicing. (Minimum clearances are shown in Figure 34.)
C
D
E
E
|
|
|
|
|
|
|
|
|
|
A |
| B |
|
|
|
|
|
| |
|
|
|
|
| SWD748N | ||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Dryer and Exhaust Duct Clearances
Area | Description | Minimum Clearance |
|
|
|
A | Left Dryer Side | 0 in. (0 cm) |
|
|
|
B | Right Dryer Side | 1 in. (2.54 cm) |
|
|
|
C | Dryer Top | 6 in. (15.24 cm) |
|
|
|
D | Dryer Rear | 4 in. (10.2 cm) |
|
|
|
E | Exhaust Duct Clearance to Combustible Materials | 2 in. (5.1 cm) |
|
|
|
NOTE: Shaded areas indicate adjacent structure.
SWD748N
Figure 34
801539 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 41 |