Exhaust Requirements

3

4

2

1

5TMB2103N

TMB2103N

1Removable strip of panel in framing wall to permit removal of tumbler from framing wall

2Partition or bulkhead

3Minimum distance between exhaust opening and roof, ground or other obstruction: 36 in. (914 mm)

42 in. (51 mm) minimum clearance on both sides of duct

5Exhaust airflow – maximum length of duct: 14 ft. (4.3 m)

Figure 9

NOTE: Do not install wire mesh or screen in exhaust duct opening to avoid lint build-up or impacting proper discharge of air from tumblers.

NOTE: Where exhaust duct pierces a combustible wall or ceiling, the opening must be sized per local codes.

NOTE: Inside of duct must be smooth. Do not use sheet metal screws to join sections.

Consult your local building code for regulations which may also apply.

26

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

70304601