Installation

Delivery Inspection

Upon delivery, visually inspect crate, protective cover, and unit for any visible shipping damage. If the crate, protective cover, or unit are damaged or signs of possible damage are evident, have the carrier note the condition on the shipping papers before the shipping receipt is signed, or advise the carrier of the condition as soon as it is discovered.

Remove the crate and protective cover as soon after delivery as possible. If any damage is discovered upon removal of the crate and/or protective cover, advise the carrier and file a written claim immediately.

Customer Service

If literature or replacement parts are required, contact the source from which the machine was purchased or contact Alliance Laundry Systems LLC at

(920)748-3950 for the name of the nearest authorized parts distributor.

For technical assistance, call:

(920)748-3121 Ripon, Wisconsin

Serial Plate Location

A record of each machine is on file with the manufacturer. The serial number decal is located at the rear of the machine. Figure 1 shows the location of the serial number on the decal. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance.

For the UWP2 models, the serial number decal is located on the left side of the control module toward the rear.

12

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232085