Installation

Chemical Injection Supply System

WARNING

Wear eye and hand protection when handling chemicals; always avoid direct contact with raw chemicals. Read the manufacturer’s directions for accidental contact before handling chemicals. Ensure an eye-rinse facility and an emergency shower are within easy reach. Check at regular intervals for chemical leaks.

SW016

Undiluted chemical dripping can damage the washer- extractor. Therefore, all chemical supply dispenser pumps should be mounted below the washer’s injection point. All dispenser tubing should also run below the injection point. Loops do not prevent drips if these instructions are not followed. Failure to follow these instructions could damage the machine and void the warranty. Figure 14 shows a typical chemical injection supply system.

1

2

3

P040I

1Injection Point

2Chemical Dispenser Pump Outlet

3PVC Pipe

Figure 14

F232085

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

31