Allied Telesis AT-X510-52GPX, AT-X510-52GTX manual LEDs for the SFP+ Slots, State, Description

LEDs for the SFP+ Slots

x510 Series Installation Guide for Stand-alone Switches

The LEDs are described in Table 8.

Table 8. SFP Slot LEDs on the AT-x510-28GSX Switch

LED	State	Description
Link/Activity	Off	The slot is empty, the SFP transceiver
		has not established a link to a network
		device, or the LEDs are turned off. To turn
		on the LEDs, use the eco-friendly button.
	Solid green	The SFP transceiver has established a
		link at 10 Mbps, 1000 Mbps or 10 Gbps to
		a network device.
	Flashing	The SFP transceiver is receiving or
	green	transmitting packets to a network device.

The LEDs for the SFP+ slots are located between the slots, as shown in Figure 9. Each SFP+ slot has one LED. The left-hand LED is for the top slot and the right-hand LED is for the bottom slot.

SFP Slot LEDs

Figure 9. SFP+ Slot LEDs

The LEDs are described in Table 9 on page 38.

37