Allied Telesis AT-X510-52GTX, AT-X510-28GTX Connecting the Management Cable to the Console Port

x510 Series Installation Guide for Stand-alone Switches

Figure 33. Connecting the Management Cable to the Console Port

2.Connect the other end of the cable to an RS-232 port on a terminal or PC with a terminal emulator program.

3.Configure the terminal or terminal emulator program as follows:

Baud rate: 9600 bps (The baud rate of the Console Port is adjustable from 1200 to 115200 bps. The default is 9600 bps.)

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Note

The port settings are for a DEC VT100 or ANSI terminal, or an equivalent terminal emulator program.

4.Press Enter.

You are prompted for a user name and password.

5.When prompted for a user name, go to “Disabling VCStack” on page 76.

75