Chapter 5: Powering On the Switch
Powering On the Switch
To power on the switch, connect the power cords to the connectors on the back panels and to the appropriate power sources. All the models have two power supplies with separate connectors.
Figure 29. Plugging in the AC Power Cord
Consider the following items as you power on the switch:
Connecting the two power cords to power sources that are on different circuits will provide power redundancy to the switch in the event a circuit fails.
Refer to “Power Specifications” on page 86 for the power specifications of the switches.
Warning
Power cord is used as a disconnection device. To
Note
Pluggable Equipment. The socket outlet shall be installed near the equipment and shall be easily accessible. E5
70
