Note
•After selecting the desired disc, you can operate in the same way as for the CD player of this unit. For details, see the CD/MP3/WMA/AAC section.
Playing MP3 Files with the CD Changer (optional)If you connect a changer compatible with MP3, you can play
1Press SOURCEto switch to the MP3 Changer mode.
2Press any one of the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer.
3To pause playback, press . Pressing again will resume playback.
Notes
•The unit can play discs containing both audio data and MP3 data.
•For operating MP3 with an MP3 compatible CD Changer, refer to “CD/ MP3/WMA/AAC” on page 12.
Alpine’s
1Press SOURCEon this unit to activate the CD Changer mode.
Alternatively, press SOURCE on the remote control
SOURCE
BAND
2Press BAND to activate the CD Changer Selection mode.
The CD Changer Selection mode remains active for several seconds.
3Press BAND until the desired CD Changer indicator appears on the display.
Notes
•If the selected CD Changer is not connected, the display will show “NO
•To operate the selected changer, refer to “CD/MP3/WMA/AAC” on page 12.
•For further details about the external input (AUX) when using
Remote Control
| |
| |
|
|
| |
| |
| |
| |
Source Button
Press this button to select the audio source.
Volume Adjustment Buttons
To increase the volume level: Press the button
To decrease the volume level: Press the button
Button
Radio mode:
Pressing this button will select, in ascending order, stations programed into the radio’s presets as shown below.
...
CD Changer mode:
DISC Select (UP) button.
Press this button to select a disc in ascending order.
MP3/WMA/AAC mode:
Folder Select (UP) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (UP) / DISC Select (UP) button. Press this button to select a folder in ascending order. Press and hold this button to select a disc in ascending order.
iPod mode:
Switches Playlist/Artist/Album/Genre/Composer.
DN Button
Radio mode:
SEEK (DN) Button.
CD/iPod mode:
Press this button to go back to the beginning of the current track.
Button
Press this button to switch between the Play and Pause modes for CD.
Audio Processor Button
Each press of the button changes the audio processor mode.
For details, refer to “Operating the Audio Processor” as shown below.
Press the button to activate the external audio processor mode when the external audio processor is connected.*
* For the operation of external audio processor, refer to the Owner’s Manual of the external audio processor you purchased. When the