Turning Mute Mode On/Off (INT Mute)
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.
Setting item: INT Mute
Setting contents:
ON / OFF (Initial setting)
Setting the AUX+ Setup Mode
You can input the audio of an external device, (such as a Portable audio player) to the BLUETOOTH interface connector of this unit. A special Conversion cable
A portable music device and a BLUETOOTH INTERFACE
Setting item: AUX+ Setup
Setting contents:
ON / OFF (Initial setting)
ON*:
Set to ON when a portable device is connected. If SOURCEis pressed and AUX+ is selected, the sound of the portable device is input to the unit.
*You can change the AUX+ Name display when AUX+ Setup is set to ON. Press ENTERwhen AUX+ SETUP is set to ON, and select AUX+ Name by turning the Rotary encoder, then press ENTER. After that, turn the Rotary encoder to select the desired AUX+ Name.
OFF:
When set to OFF, AUX+ source cannot be selected.
Setting the AUX+ Level (AUX IN GAIN)
After setting to ON in “Setting the AUX+ Setup Mode”, this setting can be carried out.
Setting item: AUX IN GAIN
Setting contents:
Low (Initial setting) / High
Low:
Decreases the external input audio level.
High:
Increases the external input audio level.
Setting the External Digital Input
When an ALPINE
You can change the Digital AUX name display when Digital AUX is set to ON. Press ENTERwhen Digital AUX is set to ON, and select Digital AUX name by turning the Rotary encoder, then press ENTER. After that, turn the Rotary encoder to select the desired Digital AUX name.
Setting item: Digital AUX
Setting contents:
ON / OFF (Initial setting)
Notes
•Press SOURCE, and select the D.Aux mode, and adjust the volume, etc.
•After input selection is completed, turn the ignition off and back on again. Setting of the optical digital input switch is completed.
•Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player’s power to OFF.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional
You can change the AUX name display when AUX IN is set to ON. Press ENTERwhen AUX IN is set to ON, and select AUX Name by turning the Rotary encoder, and then press ENTER.
After that, turn the Rotary encoder to select the desired AUX name. If the
Setting item: AUX IN
Setting contents:
ON / OFF (Initial setting)
Note
•Via
Changer Name Setting
This setting is used when the head unit is connected to the USB Adapter for MP3
Setting item: Changer Name
Setting contents:
Changer (Initial setting) / USB / Portable
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the
Setting item: Power IC
Setting contents:
ON (Initial setting) / OFF
Power IC ON :
The speakers are driven by the
Power IC OFF :
Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit’s internal amplifier is turned OFF and can not drive speakers.
POWER IC ON:
Speakers
SPEAKER | Front | |
RIGHT FRONT | ||
right | ||
| ||
SPEAKER | Rear | |
RIGHT REAR | ||
right | ||
| ||
SPEAKER | Rear | |
LEFT REAR | ||
left | ||
|
SPEAKER
Front
LEFT FRONT
left