Setting the Subwoofer Phase
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
encoder.
Setting item: SUBW. Phase
Setting contents:
PHASE 0° (Initial setting) / PHASE 180°
Setting the Subwoofer Channel (SUBW. Channel)
You can set the subwoofer output to stereo or monaural. Make sure to set the correct output for your subwoofer type.
Setting item: SUBW. Channel
Setting contents:
STEREO (Initial setting) / MONO
STEREO:
Subwoofer stereo (L/R) output
MONO:
Subwoofer monaural output
Equalizer Presets (Factory’s EQ)10 typical equalizer settings are preset at the factory for a variety of musical source material.
Flat Pops Rock News Jazz&Blues Electrical Dance Hip Hop&Rap Easy Listening Country Classical User1 User2 User3 User4 User5 User6
Note
•By selecting User's 1 to 6, you can recall the stored preset number (refer to “Adjusting the Graphic Equalizer Curve” on page 38 or refer to “Adjusting the Parametric Equalizer Curve” on page 38).
Setting the Response Slope for the High Range Speaker (TW Setup)Setting the response characteristic of tweeter to FLAT in 2.2ch (3WAY) mode could damage the speaker. Make sure the Crossover
Setting item: TW Setup
Setting contents:
FACTORY’S (Initial setting) / USER’S
FACTORY’S:
As protection from possible speaker damage, FLAT cannot be set for the response slope of the high range speaker in 2.2ch (3WAY) mode.
USER’S:
The FLAT setting is possible in 2.2ch (3WAY) mode.
Setting the Filter typeSetting item: Filter Type
Setting contents:
NORMAL (Initial setting) / INDIVIDUAL
NORMAL (L=R):
Left and right speakers are adjusted equally.
INDIVIDUAL (L/R):
Left and right speakers are individually adjusted.
Turning Media Xpander ON/OFF
When the Media Xpander is on, you can adjust the Media Xpander level (refer to “Setting the MX Level” on page 37).
Setting item: Media Xpander
Setting contents:
OFF (Initial setting) / ON
Setting the MX Level
MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, USB Memory and iPhone/iPod, will be able to reproduce the music clearly even in cars with a lot of road noise.
1Changing the source to which you want to apply Media Xpander.
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and produces well balanced sound at all frequencies.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback. MX takes advantage of this large data quantity to reproduce a more clear, clean output.
CMPM/SAT (MX level 1 to 3):
This corrects information that was lost at the time of compression. This reproduces a
DVD (Video CD) (MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds to the media connected.
Notes
•Each music source, such as FM radio, CD, and MP3/WMA/AAC can have its own MX setting.
•On disks with both MP3/WMA/AAC and
•Setting to Non Effect sets MX mode of each music source to OFF.
•The function is inoperable when DEFEAT is set to ON.
•There is no MX mode for AM radio.
•If an audio processor with the MX function
•“CMPM” is applied for MP3/WMA/AAC and iPhone/iPod.
•“SAT” is applied for XM radio and SIRIUS radio.
Setting EQ mode
This setting gives you a choice of
Setting item: EQ Mode
Setting contents:
Parametric EQ (Initial setting) / Graphic EQ
PEQ:
GEQ: