DVD (Video CD) (MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds to the media connected.
Notes
•Each music source, such as FM radio, CD, and MP3/WMA/AAC can have its own MX setting.
•On disks with both MP3/WMA/AAC and
•Setting to Non Effect sets MX mode of each music source to OFF.
•The function is inoperable when DEFEAT is set to ON.
•There is no MX mode for AM radio.
•If an audio processor with the MX function
•“CMPM” is applied for MP3/WMA/AAC and iPhone/iPod.
•“SAT” is applied for XM radio and SIRIUS radio.
Setting EQ modeThis setting gives you a choice of
Setting item: EQ Mode
Setting contents:
Parametric EQ (Initial setting) / Graphic EQ
PEQ:
GEQ:
You can change the unit, (cm or inch) of time correction.
Setting item: TCR Parameter
Setting contents:
cm (Initial setting) / inch
160 Hz~1 kHz | |
|
|
630 Hz~4 kHz | |
|
|
1.6 kHz~10 kHz | |
|
|
10 kHz~17.5 kHz | |
|
|
3Turn the Rotary encoder to adjust the level. Adjustable level: −6 to +6 dB
4Press SOURCEto set the bandwidth (Q). Adjustable bandwidth: 1, 2, 3, 4
5To adjust another band, repeat steps 1 to 4 and adjust all bands.
Note
•While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers.
Adjusting the Graphic Equalizer Curve
You can modify the equalizer settings to create a response curve more appealing to your personal taste. To adjust the graphic equalizer curve, set the EQ Mode to Graphic EQ. For details, refer to “Setting EQ mode” on page 17.
1After selecting Graphic EQ from the Sound Field mode, press BAND to select the band to be adjusted.
Band 1 Band 2 Band 3 Band 4 Band 5 Band 6 Band 7 Band 1
80 Hz | |
|
|
250 Hz | |
|
|
500 Hz | |
|
|
1 kHz | |
|
|
4 kHz | |
|
|
8 kHz | |
|
|
16 kHz | |
|
|
2Turn the Rotary encoder to adjust the level. Adjustable output level: −6 to +6 dB
3To adjust another band, repeat steps 1 and 2, and then adjust all bands.
The setting of Parametric EQ/Graphic EQ and Time Correction can be adjusted in this mode.
Adjusting the Parametric Equalizer Curve
You can modify the Equalizer settings to create a response curve more appealing to your personal taste. To adjust the Parametric Equalizer Curve, set the EQ Mode to Parametric EQ. For details, refer to “Setting EQ mode” on page 17.
1After selecting Parametric EQ from the Sound Field mode, press BAND to select the band to be adjusted.
Band 1 Band 2 Band 3 Band 4 Band 5 Band 1
2Press or to select frequency bands.
Adjustable frequency bands: 63 Hz to 17.5 kHz (in 1/3 octave steps).
63 Hz~200 Hz | |
|
|
Adjusting the Time Correction
Before performing the following procedures, refer to “About Time Correction” on page 39.
1After selecting T.Correction from the Sound Field mode, press BAND to select a speaker to be adjusted.
*1
*2 Front
*3
*4
2Turn the Rotary encoder to adjust the distance correction value (0.0 to 336.6cm).
L = (distance to farthest speaker) - (distance to other speakers)
3Repeat steps 1 and 2 to set another speaker.
By setting these values to make its sound reach the listening position at the same time as the sound of other speakers.