(SIRIUS mode)

•The subscribed program is being updated. During update, audio will be muted until update is completed.

–Wait until the update is completed. After completion, follow the indication “SUB Updated Press Any Key” to press any key on the unit to continue, the unit re-tune to previous channel.

(SIRIUS mode)

•The Receiver is updating the SIRIUS channel line up. During update audio will be muted until update is completed.

–Wait until the channel update is completed. After completion, the unit automatically re-tune to previous channel.

Indication for USB Memory/Portable audio player

•Database error or decoder error.

–You can solve the problem by switching the source.

•Communication error or boot error, etc.

–You can solve the problem by reconnecting the USB Memory/ Portable audio player or changing source.

•The Portable audio player is not verified.

–You can solve the problem by reconnecting the Portable audio player.

•Abnormal current is run to the USB connector device.

–You can solve the problem by switching the source.

•A USB device/Portable audio player that is not supported by the unit is connected.

–Connect a USB device/Portable audio player that is supported by the unit.

•A USB Memory/Portable audio player is not connected.

–Make sure the USB Memory device/Portable audio player is correctly connected and the cable is not excessively bent.

•No song (file) is stored in the USB Memory/Portable audio player.

–Connect the USB Memory device/Portable audio player after storing songs (files).

•A sampling rate/bit rate not supported by the unit is used.

–Use a sampling rate/bit rate that is supported by the unit.

•A copy-protected WMA file was played back.

–You can only play back non-copy-protected files.

Indication for iPhone/iPod Mode

•The iPhone/iPod is not connected.

–Make sure the iPhone/iPod is correctly connected (refer to “Connections” on page 52).

Make sure the cable is not bent excessively.

•There are no songs in the iPhone/iPod.

–Download songs to the iPhone/iPod and connect to this unit.

•Database error or decoder error.

–You can solve the problem by switching the source.

•Communication error or boot error, etc.

–You can solve the problem by reconnecting the iPhone/iPod or changing source.

•The iPhone/iPod is not verified.

–You can solve the problem by reconnecting the iPhone/iPod.

•Abnormal current is run to the USB connector device.

–You can solve the problem by switching the source.

•A USB device that is not supported by the unit is connected.

–Connect a USB device that is supported by the unit.

47-EN