IMPRINT audio processor
Power Button
Press this button to turn the power on/off.
Band Button
Radio mode:
BAND Button.
Press this button and the band will change.
Changer mode:
To switch the changer.
UP Button
Radio mode:
SEEK (UP) button.
CD/iPod mode:
Press this button to advance to the beginning of the next track.
Button
Radio mode:
Pressing this button will select, in descending order, stations programed into the radio’s presets as shown below.
...
CD Changer mode:
DISC Select (DN) button.
Press this button to select a disc in descending order.
MP3/WMA/AAC mode:
Folder Select (DN) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (DN) / DISC Select (DN) button.
Press this button to select a folder in descending order.
Press and hold this button to select a disc in descending order.
iPod mode:
Switches Playlist/Artist/Album/Genre/Composer.
Mute Button
Press this button to lower the volume by 20 dB instantly. Press this button again to cancel.
Applicable battery: Use two “AAA” sized dry batteries or equivalent.
1Opening the battery cover
Slide out the battery cover while firmly pressing in the direction of the arrow.
2Replacing the battery
Insert the batteries, observing the polarities as illustrated.
3Closing the cover
Slide the cover as illustrated until a click is heard.
1Press A.PROC to select the mode.
Normal mode Time Correction
2Press or to select the item.
Time Correction mode/Crossover
Point the remote control transmitter at the remote control sensor.
Remote control sensor
Connectable to Remote Control Interface BoxThis unit may be controlled from the vehicle’s audio controls.
An optional Alpine Remote Control Interface Box must be used. For details, contact your Alpine dealer.