Connect a Mobile Phone
If a mobile phone is connected for the first time, register a mobile phone by doing the following.
Registration
Bluetooth Setting
Refer to “Setting the Bluetooth Connection (Bluetooth)” (page 12).
Refer to “Sending Name Information of the Unit (VISIBLE MODE)” (page 13).
➧
Searching for a Mobile Phone
Refer to “Searching for Connectable Bluetooth Device (Bluetooth Search) (SEARCH DEVICE)” (page 12).
➧
Selection for a Mobile Phone
Touch [PAIR] of the mobile phone to be registered.
➧
Inputting a pass code
Input a
*When a pass code is input, enter the number within 30 seconds to ensure security.
➧
Input a pass code on the Mobile Phone.
Input the same pass code number
*When a pass code is input, enter the number within 30 seconds to ensure security
|
| ➧ | |
|
|
|
|
|
| Registration is complete. |
|
|
|
|
|
|
|
|
|
| Connection | ➧ | |
|
|
| |
Connection for a Mobile Phone
Refer to “Setting the registered Bluetooth Device (PAIRED DEVICE)” (page 12).
➧
Selection for a Mobile Phone
Touch [CONNECT] of the mobile phone to be registered.
➧
The connection is made.
•The Bluetooth setting is required for a mobile phone. See the Owner’s Manual of the mobile phone.
•To input a pass code in the mobile phone, see the Owner’s Manual of the mobile phone.
•Perform the operations observing the screen of the mobile phone
until the connection has completed.
•If ON is set in “Setting a Connection automatically (AUTO CONNECT)” (page 13), automatic connection of the previously connected mobile phone will start when power is turned on.
•If you previously registered a mobile phone in the unit, select the mobile phone you want from the registration device setting list. Refer to “Setting the registered Bluetooth Device (PAIRED DEVICE)” (page 12).
Receiving a Call
When a call is received, a received call sound rings, and the received call is announced in the display.
Touch [ 
].
The call starts.
•If ON is set in “Receiving a Received Call automatically (AUTO ANSWER)” (page 13), an incoming call is answered automatically 5 seconds after it is received.
•You can set whether
Hanging up
Touch [ 
].
The call finishes.
Placing a Call
1 Touch [MOBILE PHONE] on the SOURCE SELECT screen.
The MOBILE PHONE screen is displayed.
2 Select the desired method.
