Alpine TME-M740BT Getting Started, Location of Controls, 3-EN, DIMMER Sensor, Volume button

Models: TME-M740BT

1 64
Download 64 pages 22.36 Kb
Page 5
Image 5
Getting Started

After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal.

In cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal.

Operation of some of the functions of this unit is very complex. Because of this, it was deemed necessary to place these functions into a special screen. This will restrict operation of these functions to times when the vehicle is parked. This ensures the focus of the driver’s attention will be on the road and not on the TME-M740BT. This has been done for the safety of the driver and passengers. The setup operation cannot be made if the car is moving. The car must be parked and the parking brake must be engaged for the procedure described in the Owner’s Manual to be valid. The warning “Operation is not allowed while driving,” will be displayed if any attempts are made to perform these operations while driving.

Getting Started

Location of Controls

DIMMER Sensor

Senses the brightness of the car interior

Volume button

Adjust the volume level by pressing the Location of Controls or DIMMER Sensor button.

Remote Sensor

Point the optional remote control transmitter toward the remote sensor within a range of 2 m.

SOURCE button

Each time you press the SOURCE button, SOURCE is switched.

If the button is pressed and held for at least 3 seconds, the Vehiclehub Pro VPA-B222’s (optional) power is turned on/ off.

Volume button (POWER) button

Turns the power on and off.

If the button is pressed and held for at least 3 seconds, the Vehiclehub Pro VPA-B222’s (sold separately) V.SEL is turned on/off.

Bluetooth Indicator

Lights up when “Setting Bluetooth Connection (Bluetooth)” (page 12) is set to ON. Blinks when a hands-free phone is used to receive, place a call or while calling.

Mobile Phone Microphone

If the received signal is not strong, use the supplied external microphone for hands-free phone operation.

Mobile Phone external Microphone jack

If an external microphone is connected, the internal microphone cannot be used.

3-EN

Page 5
Image 5
Alpine TME-M740BT Getting Started, Location of Controls, 3-EN, DIMMER Sensor, Volume button, Remote Sensor, SOURCE button