Configuration password and options

When the interactive whiteboard system is started for the first time, the administrator or installer is
asked to set a password to access the configuration settings menu. Optionally, a host name and
other options for the appliance can be configured at the same time.
N O T E S
lThis password is required to access the system configuration settings menu.
lYou need to set a host name if you want to configure remote appliance firmware updates (see
Updating appliance firmware remotely on page 19).
lIf you want to change your configuration password and options later, you can do so in the
configuration settings menu (see Configuration settings menu on the next page).
gTo set the password and setup options
1. Type a password in the Password box.
N O T E
The password must be at least one character long and can include symbols. You can also
change the password in the system configuration settings menu (see Configuration settings
menu on the next page).
2. Type the password again in the Confirm password box.
3. Press Next.
The Setup Options window appears.
4. Follow the on-screen instructions to select setup options for the appliance.
N O T E
If you forget your password, contact SMARTSupport (smarttech.com/contactsupport). They
will provide you with a temporary password that enables you to access the administrator
pages and change the temporary password to a unique password.
C H A P T E R 3
Starting your interactive whiteboard system
14