Alpine Innovation 800i5e-SMP Retrieving your password, Resetting the projector

interactive whiteboard system.
lDo not adjust any settings in the service menu other than those listed in this guide. Changing
other settings can damage or affect the operation of your projector and may invalidate your
warranty.
Retrieving your password
If you forget the projector’s password, you can retrieve it by accessing the projector service menu
directly from the projector or from the password settings menu on your projector’s web page (see
Password settings on page 80).
gTo retrieve your password from the service menu
1. Using the remote control, press the following buttons quickly to access the service menu:
Down,Up,Up,Left,Up.
2. Scroll to Password Get, and then press Enter on the remote control.
The password appears on the screen.
3. Write down the password.
4. Scroll to Exit, and then press Enter on the remote control to exit the projector service menu.
Resetting the projector
At some point during troubleshooting, you might need to reset all projector settings.
I M P OR T A N T
This action is irreversible.
gTo reset all projector settings
1. Using the remote control, press the following buttons quickly to access the service menu:
Down,Up,Up,Left,Up.
2. Scroll to Factory Reset, and then press Enter on the remote control.
3. Scroll to Exit, and then press Enter on the remote control to exit the projector service menu.
C H A P T E R 7
Troubleshooting your interactive whiteboard system
70