Submenu setting Description
3D Invert Selects the 3D Invert setting (L-R or R-L).
lL-R displays visual data for the left eye first.
lR-L displays visual data for the right eye first.
3D Format Selects the 3D format (Interleaved or Under-over).
lInterleaved breaks down the image frame for each eye,
alternately displaying a line of visual information from each
frame.
lUnder-over concurrently displays horizontally stretched image
frames for each eye, one above the other.
USB Control settings
This menu allows you to associate a video source with a USB receptacle on the ACP.
Submenu setting Description
USB1 Source Enables touch for the selected video source (VGA-1,VGA-2,HDMI
or Disabled) by associating the video source with the room computer
USB receptacle (USB1) on the ACP.
USB2 Source Enables touch for the selected video source (VGA-1,VGA-2,HDMI
or Disabled) by associating the video source with the laptop USB
receptacle (USB2) on the ACP.
Network settings
This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP is not used.
Submenu setting Description
DHCP Determines if the projector’s IPaddress and other network settings
are dynamically assigned by a DHCPserver or manually set.
lOn allows the network’s DHCP server to assign a dynamic IP
address to the projector.
lOff allows you to manually set the projector’s IP address and
other network settings.
IP Address Displays or allows you to set the projector’s IP address in values
between 0.0.0.0 and 255.255.255.255.
Subnet Mask Displays or allows you to set the projector’s subnet mask number in
values between 0.0.0.0 and 255.255.255.255.
Gateway Displays or allows you to set the projector’s default network gateway
in values between 0.0.0.0 and 255.255.255.255.
DNS Displays or allows you to set the projector’s IP address for your
network’s primary domain name server in values between 0.0.0.0 and
255.255.255.255.
A P P E N D I X A
Remotely managing your system through a network interface
78