Alto-Shaam AR-7E Ele Ctrical Con Nection, To avoid electrical shock, this, local codes, Dan Ger

ELE CTRICAL CON NECTION

The appliance must be inst alled by a qualified serv ice technician. The oven must be properly grounded in accordance with the Nat ional Electr ical Cod e and applica ble local codes .

DAN GER

To avoid electrical shock, this

appliance MUST be adequately

grounded in accordance with local

electrical codes or, in the absence of

local codes, with the current edition

of the National Electrical Code

ANSI/NFPA No. 70. In Canada, all

electrical connections are to be

made in accordance with CSA C22.1,

Canadian Electrical Code Part 1 or

local codes.

Plug the unit

into a properly grounded recep tac le

ONLY, positioning

the unit so that the plug is easily

accessi ble in case of an emergen cy. Arcin g will occ ur

when connecting

or dis con nec ting the unit unles s all

controls are in the “OFF” position.

Proper receptacle

or outlet configuration or

perm anent wiring

for this unit must be installe d by a

licensed electrician

in acc ordance with applic able

loca l electrica l codes .

Afte r wiring

and power con nec tion has been

compl eted, turn the main power switch to the “ON ”

posit ion.

The main pow er switch can be left “ON”

for dai ly use, but should

be turned “OFF ” when

cleani ng or per for ming maintenance or repairs

to

the rot isserie.

“WAR NING”

RISK

OF FIRE!

Use a UL Listed grounding

type plug

rated

250 Volts,

50

Amperes,

1 Phase,

3 wire for single

phase

units

and 250

V, 50 A, 3 Phase,

4 wire

for

three

phase units.

Plug

to

be selected

and

installed

only

by

qualified

service

personnel.

Individual

conductors

are marked L1, L2, L3

when applicable,

N when

applicable,

and G.

DAN GER

APPLIANCES WITH NO CORD

PROVIDED BY FACTORY MUST BE

EQUIPPED WITH A CORD OF

SUFFICIENT LENGTH TO PERMIT

THE APPLIANCE TO BE MOVED

FOR CLEANI NG.

ELECTRICAL CONNECTIONS MUST

BE MADE BY A QUALIFIED SERVICE

TECHNICIAN IN ACCORDANCE WITH

APPLICABLE ELECTRICAL CODES.

IN STA LLA TIO N

E LEC TR IC AL			CYCLE/HZ		KW
VOLTAGE		PHASE		AMPS
208	(AGCY )	1	60	40.0	8.3	BARE END
240	(AGCY )	1	60	38.0	8.8	NO PLUG
208	(AGCY )	3	60	33.0/ ph	8.3	BARE END
240	(AGCY )	3	60	32.0/ ph	8.8	NO PLUG
380-415 (AGCY )		3	50	24.0/ ph	8.8	NO CORD
	380	3	50	22.0/ ph	7.4	NO PLUG
	415	3	50	24.0/ ph	8.8

Wire diagrams are located in the inside access panel of the unit

RE GAR DI NG IN TE RN ATI ON AL STA ND ARD UNITS: If the uni t is not equipped with flexible cord with plug, an all-pole countr y approved disco nnectio n devi ce which has a contact separation of at leas t 3mm in all poles must be incorp orate d in the fixed wiring for disconne cti on. When usi ng a cord without a plug, the green/yel low conductor shal l be conn ected to the termi nal which is marke d with the ground symbo l. If a plug is use d, the socke t outl et must be easily accessible. If the power cord needs replacement, use a similar one obta ine d from the distr ibutor.

For 230V units: To prevent an elect rical shock hazard between the appliance and other appliances or metal parts in clos e vici nity, an equa lizati on-b onding stud is provided . An equalization bondi ng lead must be connected to this stud and the othe r appliances / metal parts to provide suffi cie nt prote ction

against potential difference. The terminal is marked with the follo wing symbol.

Powis recomr CordmendedConnectfor allion:applicaThetionssid.e Ifconnea bottomction con nection is nece ssa ry for counter top units, user will need to provide a cutout in the cou ntertop to allo w the cor d to hang freely withou t crimp ing.

Hard wired models:

Hard wired mode ls must be equip ped with a country certifi ed external allp ole disconnec tion swi tch with suffi cie nt con tact separation.

If a pow er cor d is used for the connect ion of the produ ct an oil resis tant cord like H05RN or H07 RN or equ ivalent must be use d.

: 230V applia nces must be connected NOT E to an elect rica l circuit that is

protect ed by an external GFCI outlet.

D AN GER

ENSURE POWER SOURCE

MATCHES VOLTAGE STAMPED

ON APPLIANCE NAMEPLATE.

AR -7 E Rot is ser ie Oper at ion & Care Manual • 5