Alto-Shaam 1200-UP, 300-S Ope R A Tio N, Deluxe Control Option, Deluxe Control Set-Up, on/off Key

OPE R A TIO N

DELUXE CONTROL OPTION

1 power on indicator light	1 power on indicator light
6 on/off key	6 on/off key
2 heat indicator	2 heat indicator
3 led display	3 led display
4 lock indicator	4 lock indicator
5 up/down	5 up/down
arrow keys	arrow keys

upper

lower

Double

Compartment

Control

Deluxe Control	With multiple timers
	7 shelf timer keys

DELUXE CONTROL SET-UP

on/off Key

Press the on/off key once and the power indicator light will illuminate. Press and hold the on/off key until the LED display turns off (at least three seconds) and power indicator light goes out.

up/down Arrow Key

The up and down arrow keys are used for a variety of settings when selecting the holding temperature. If an arrow key is pressed and released the display will show the current set temperature for four seconds. If an arrow key is held (at least eight seconds), the value will change at a rapid rate. Pressing an arrow key when the set temperature is displayed will increase/decrease the temperature by 1°. Pressing and holding an arrow will increase/ decrease the temperature by 10°.

Enable / Disable Beeper

A beeper sounds when an error code is displayed. To choose between beeper on and beeper off mode, the control must be off, then press and hold the down arrow key until either “ON” or “Off” is shown in the LED display. Press either arrow button to toggle the beeper mode.

Fahrenheit/Celsius

	With the control off, to choose between
°F/°C
	Fahrenheit and Celsius, press and hold the
	up arrow key until either °F or °C is shown in
	LED display. Press either arrow key to toggle
	the temperature scale.

The control has a four-digit LED display. When the display is on, it will show current holding temperature, as well as diagnostic information.

control lock

The warmer controls can be locked so that no changes can be made to the set temperature.

To lock the display, press and hold the ON/ OFF key and the Up Arrow key at the same time. The lock LED will illuminate. When the lock LED is illuminated, additional programming will not be functional other than the key sequence required to unlock the panel. To unlock the display, press and hold the ON/OFF key and the Down Arrow key at the same time. The lock LED will extinguish. The panel keys will resume normal function.

holding cabinets • installation/operation/service manual - pg. 17