OPE R A TIO N
DELUXE CONTROL TIMER PROGRAMMING
Timer Programming Information
1. Turn On/Off Control Key OFF.
Press the On/Off Key until the display turns
OFF (at least 3 seconds) and On/Off Key’s Power Indicator Light goes out.
Note: The following steps can only be done when the Control is OFF.
2. Set Shelf Timer Keys.
Press and hold a Shelf Timer Key (at least
3 seconds) until the countdown time is shown
in the LED display. Use the Up or Down arrow key to change the time desired.
Time will display as HH:MM.
3. Set Additional Timer Keys.
Repeat step 2 for each Shelf Timer Key to be programmed.
4. Turn On/Off Power Key ON.
Using the timer, press the On/Off key to turn ON unit. Power Indicator Light will illuminate.
The Multiple Shelf Timer Key option is available for hot food holding units with the Deluxe Control. These keys monitor food safety by using a
5. Press Shelf Timer Key.
Activate the shelf timer by pressing the corresponding button. Shelf LED display will illuminate and the count down will begin. The timer will display as HH:MM when the remaining time is >60 minutes. It will display as MM:SS when the remaining time is
<60 minutes.
The timer LED’s will illuminate as follows:
a)All expired timers will flash quickly (may be more than one)
b)The timer with the shortest amount of time remaining will flash slowly.
c)All other active timers will be illuminated (may be more than one).
6.Acknowledge expired timers.
The LED will quickly flash when time expires. Press expired Shelf Timer Key to acknowledge expired timer.
To Cancel a Timer:
Press and hold desired Shelf Timer Key for two seconds.
Power Failure:
The Power Indicator Light by On/Off Power Key will blink to indicate a power failure. To stop the blinking, simply depress On/Off Key. The memory will not be impaired.
holding cabinets • installation/operation/service manual - pg. 19