9. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length of disc. You create a seamless loop between two continuous points of a disc.
1) Press PLAY/PAUSE BUTTON (13) to activate playback mode.
Figure 16
2) Press the IN BUTTON (22). This will set the starting point of the SEAMLESS LOOP. The IN BUTTON (22) LED will light.
Figure 17
3) Press the OUT BUTTON (22) to set the ending point for your LOOP (Figure 18). The IN BUTTON (22) and OUT BUTTON (22) LEDs will immediately begin to flash rapidly, indicating the SEAMLESS LOOP mode has been activated.
VFD LOOP INDICATORS - During a loop, the RELOOP INDICATOR (73) will turn on in the VFD DISPLAY (23) indicating a loop is active.
Figure 18
EXITING A LOOP - To exit a SEAMLESS LOOP, press the OUT BUTTON (22). The IN BUTTON (22) and OUT BUTTON (22) LEDs will remain lit. Music playback will resume normal play. The IN BUTTON (22) and OUT BUTTON (22) LEDs will remain lit to remind you that a loop is in memory.
Figure 19
©American Audio® - www.AmericanAudio.us - VERSADECK Instruction Manual Page 23
