American Dryer Corp MLG-460 manual

2.Electrical Service Specifications

MLG-460

ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)

IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.

exact voltage .

NOTES: A. Fuse ratings are dual-element, time-delay, current limiting, class RK1 or RK5 ONLY.

Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to

B.appliance

amp draw rating and type of breaker used.

C.Circuit breakers for 3Ø dryers must be 3-pole type.

SERVICE		WIRE	APPROX.		MINIMUM	FUSING	CIRCUIT
	PHASE		AMP DRAW
VOLTAGE		SERVICE	60 Hz	50 Hz	WIRE SIZE*	Dual Element	BREAKER
						Time Delay
208	3ø	3/4	107	---	1/0	150	150
240	3ø	3	104	109	1/0	150	150
380	3ø	3/4	---	60	4	100	90
416	3ø	3/4	---	57	4	90	90
460	3ø	3/4	52	---	4	80	90

DEDICATED SPRINKLER SERVICE

Dryer

Nameplate

1ø

---

2

16

3.5

5

* AWG Stranded Wire Type...for individual lengths less than 100 feet (31 m).

IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is affixed to the right side of the main electrical enclosure. In the case of 208 VAC or 240 VAC, the supply voltage must match the electric service specifications of the data label exactly.

WARNING: 208 VAC and 240 VAC ARE NOT THE SAME. Any damage done to the dryer components due to improper voltage will automatically VOID THE WARRANTY.

IMPORTANT: For proper sprinkler and dryer operation, sprinkler must be powered by a “separate or dedicated” single-phase (1ø) multi-wire branch circuit at dryer’s nameplate voltage.

NOTE: For 4-wire service, cap the neutral.

NOTE: Contact the factory for electrical information not listed.

NOTE: ADC reserves the right to make changes in specifications at any time, without notice or obligation.

23