American Power Conversion S15BLK Rear Panel Connectors and Circuit Breaker, Setup Push Button

12SETUP Push Button

This pushbutton is used to advance the display through the various user-selectable set up functions provided by the unit such as: Audible Alarms, Sensitivity, Display Dimmer, LED Dimmer, Go To Bat If, Outlet 1 & 2 Delay (in seconds), Low Bat Warning, Bat Rep Date, and so on.

13REGULATING Status Indicator

When lit (blue), it indicates automatic voltage regulation (AVR) is enabled and operating to correct low or high voltage conditions.

14DELAYED 2 Status Indicator

When lit (blue), conditioned power is being supplied to equipment connected to the rear-panel outlets marked Delayed 2.

Rear Panel Connectors and Circuit Breaker

The rear panel connectors for the S10 and S15 Power Conditioner are shown in Figure 3. The only difference between the rear panels of the S10 and S15 is the S15 provides a coaxial cable splitter and jacks for Ethernet equipment surge-protection, and a connector for an external Battery Pack (sold separately). Each numbered callout corresponds to a numbered description in the list that follows Figure 3.

1 2 3 4 5

13 12 12 11 10 9 8 7 6

Figure 3. S15 Rear Panel Connectors, Indicator, and Circuit Breaker

All outlets provide surge protection, voltage regulation, noise filtering and pure sine wave battery backup power.

1-8