S10/S15 Set Up Using Front-Panel Controls
You can use the front panel SETUP and Arrow Up/Down pushbuttons to configure (or turn on/off) various functions provided by each S Type unit. When you press the SETUP pushbutton, the unit functions are displayed in the following order:
1.Audible Alarm
2.Sensitivity, Display Dimmer
3.LED Dimmer
4.Go To Battery If <XX Volts, Go To Battery if >XX Volts
5.Outlet Delay1
6.Outlet Delay2
7.Low Battery Warning
8.Battery Replacement Date
9.Do Quick Selftest
10.Do Runtime Calculation
11.Display Beep Test
12.Screen Saver On/Off, or Reset to Default
