Ampro Corporation 420 Appendix B Connector Part Numbers, Pin Number/Pin Spacing, Manufacturer

Appendix B Connector Part Numbers

These connectors are used on the CoreModule 420 and can be used to determine the mating connectors, if you want to make your own cables.

Table B-1. Connector and Manufacturer’s Part Numbers

Connector		Pin Number/Pin Spacing/	Manufacturer	Manufacturer’s PN
		Orientation
J2	– Ethernet	8-pin, 0.1”, right angle	Molex	Housing = 10-11-2063
				Pins = 08-55-0102
J3	– Serial 1	10-pin, 0.1”, right angle	Molex	10-89-1106
J4	– Floppy/	26-pin, 0.1”, right angle	T&B Ansley or	609-2600M or
	Parallel		Spectra-Strip	812-2622-134
J5	– Utility	10-pin, 0.1”, right angle	AMP or	102387-1 or
			Molex	22-55-3101
J6	– IDE	44-pin, 2mm, straight	TEKA	HM222BT1U-191-00
J7	– Power	10-pin, 0.1”, right angle	AMP or	Housing = 87456-5 or
			Molex	22-55-2101
			AMP or	Contact = 87523-6 or
			Molex	16-02-0103
J8	– GPIO	10-pin, 2mm, straight	Adam Tech or	D2PH 2 10 SG .146/.118/.420 or
			Samtec	TW-05-06-G-D-420-110
J9	– Serial 2	10-pin, 0.1”, right angle	Molex	10-89-1106
J10 – USB		5-pin, 0.1”, right angle	Molex	22-12-2054
J11 – Video		44-pin, 2mm, right angle	Adam Tech or	2PH2R44SGA
			Astron	AT-PH2-44-2-1-GF
J13 – Serial 3		10-pin, 0.1”, straight	Molex	15-91-3100
J14 – Serial 4		10-pin, 0.1”, straight	Molex	15-91-3100

CoreModule 420 QuickStart Guide 23