AMX NXB-KNX manual Enable / Disable Security Settings, Login Information

Configuration

Security Settings

Select Security Settings from the Admin drop-down menu to open the Security Settings page (FIG. 4). Use the options on the page to specify security options and login information for this NXB-KNX unit.

FIG. 4 Security Settings page

Enable / Disable Security Settings

Web Security:Click this checkbox to enable Web Security.

When Web security is enabled, a username and password are required to access any system Web pages (default = disabled).

Telnet Security: Click this checkbox to enable Telnet Security.

With Telnet Security enabled, a username and password are required to establish a Telnet or SSH connection (default = disabled).

Admin Security: Click this checkbox to enable Admin Security.

With Admin Security enabled, a username and password are required to modify any system configuration item (default = disabled).

Restore Factory Defaults: Click to restore all security settings to their factory default (all disabled).

Login Information

Use this set of options to specify a Username and Password. These will be required only if one or more of the Security Settings are enabled.

Username:	Enter the Username that will be required to login to this unit if
	security is enabled. The default Username is "administrator".
New Password:	Enter a new password that will be required to login to this unit if
	security is enabled. The default Password is "password".
Confirm Password:	Re-enter the new password in this field.
Restore Factory Defaults:	Click to restore the login information to the factory defaults:
	• Default Username = administrator
	• Default Password = password

NXB-KNX NetLinx KNX Interface 7