Configuration
Ends:These options allow you to specify when to stop using daylight savings time.
Select a month and time to start from the
•Select Fixed to end daylight savings at a specific Day, Month and Time (an additional field for Day is provided when this radio button is selected).
•Select Occurrence to end daylight savings at a specified occurrence (additional fields for Week of the Month, and Day of the Week are provided).
Click Accept to save your changes. Note that changes on this page take effect immediately.
Click Cancel to cancel any changes.
Clock Manager - NIST Servers
Select NIST Servers from the Clock Manager
FIG. 12 Clock Manager - NIST Server Manager page
Note that this tab is enabled only if Network Time is selected (on the Mode Manager page).
The options on this page allow you to select the NIST server that will be queried at each clock synchronization, and allow you to add more NIST servers to the list.
Only one NIST server is selectable at any given time.
To add a NIST server, enter the NIST Server Name, IP Address and Location in the fields provided.
To remove a NIST server from the list, click the Remove button.
Click Accept to save your changes. Note that changes on this page take effect immediately.
Click Cancel to cancel any changes.
12 |
