AMX NXB-KNX manual Port Settings

	Configuration
Domain Suffix:	Enter the Domain Suffix for this unit.
DNS 1, 2, 3:	Enter up to three DNS addresses for this unit.
Reboot:	Click to initiate a system reboot. IP Settings changes only take effect after a
	reboot.

Port Settings

Select Port Settings from the Admin drop-down menu to open the Port Settings page (FIG. 7). Use the options on the page to specify various Port settings for this NXB-KNX unit.

FIG. 7 Port Settings page

The options on this page provide inputs for enabling and disabling of HTTP, HTTPS, Telnet, SSH and FTP ports, and allow you to change each port number from it’s standard default assignment.

HTTP Port Number:	Default = enabled, default port number = 80.
HTTPS Port Number:	Default = enabled, default port number = 443.
Telnet Port Number:	Default = enabled, default port number = 23.
SSH Port Number:	Default = enabled, default port number = 22.
FTP Port Number:	Default = enabled, default port number = 21.
Restore Factory Defaults:	Click to restore all Port settings to the factory defaults.
Reboot:	Click to initiate a system reboot. Port changes only take effect after a
	reboot.

NXB-KNX NetLinx KNX Interface 9