FRYER TROUBLESHOOTING GUIDE (Continued)

PROBLEM

CAUSE

REMEDY

 

 

 

Main burners do not

3. POWER switch of fryer not switched

3. Press the POWER switch ON.

ignite. (Continued)

ON.

 

 

4. Gas control valve knob set to OFF or

4. Perform the normal Lighting

 

PILOT.

Procedure. Turn the gas

 

 

control valveknob to ON to

 

 

light the main burners.

 

 

If the burners do not light, the

 

 

gas control valve has failed and

 

 

must be replaced.

 

5. Front door open, causing the door micro-

5. Close the door; then switch the

 

switch to actuate.

POWER switch OFF and back

 

NOTE: This only applies to a fryer

to ON. (This resets the gas

 

control valve for proper opera-

 

with a built-in filter system.

 

tion.)

 

 

 

6. Low gas supply pressure [less than 6”

6. Measure the gas supply pres-

 

W.C. for natural gas; (11” W.C. for pro-

sure.

 

pane) when all other gas-powered equip-

Contact your local gas supplier

 

ment is operating].

to obtain adequate gas supply

 

 

pressure.

 

7. Pilot burner problem.

7. Refer to the preceding Pilot

 

 

Burner problems and use the

 

 

correct remedy.

 

8. Thermostat control set below the tempera-

8. Increase the thermostat setting

 

ture of the liquid shortening in the kettle.

until the burners light. If this

 

 

setting is greater than the de-

 

 

sired temperature, reset the

 

 

thermostat to the desired set-

 

 

ting and allow the shortening to

 

 

cool to the desired tempera-

 

 

ture.

 

9. Gas control valve has failed.

9. Replace the gas control valve.

 

 

 

Main burners do not

1. Thermostat has failed.

1. Turn the thermostat control

stop burning.

 

knob to OFF. If the burners

 

 

do not quit burning, the ther-

 

 

mostat has failed and must be

 

 

replaced.

 

2. Gas control valve has failed.

2. Turn the gas control valve knob

 

 

to OFF. If the burners do not

 

 

quit burning, the gas control

 

 

valve has failed and must be

 

 

replaced.

 

 

 

21

Page 20 Page 22
Page 21
Image 21
Anetsberger Brothers MX-14-2E, MX-7E, MX-14E, MX-14AA, MX-7A, MX-14-2AA warranty Pilot
Page 20 Page 22

MX-14-2AA, MX-7A, MX-14-2E, MX-14AA, MX-14E specifications

Anetsberger Brothers is renowned in the world of technology for their innovative and high-quality products, among which the MX series stands out. The MX-14-2AA, MX-7E, MX-7A, MX-14AA, and MX-14-2E models are prime examples of their commitment to excellence.

The MX-14-2AA is designed for intense usability with a focus on performance. Its robust construction ensures durability while providing excellent functionality in various environments. This model features an advanced control interface, allowing users to adjust settings with precision. Its energy-efficient design not only minimizes operational costs but also reduces the carbon footprint, showcasing Anetsberger Brothers' commitment to sustainability.

The MX-7E emphasizes versatility and ease of use. It is equipped with a user-friendly control panel that facilitates quick adjustments, making it suitable for both novice and experienced users. The MX-7E also incorporates cutting-edge technology for enhanced productivity, ensuring that tasks are completed swiftly without compromising on quality.

The MX-7A model takes a step further by integrating innovative features that optimize performance. With its superior thermal control system, users can expect consistent results, making it ideal for commercial applications where reliability is paramount. Additionally, the MX-7A incorporates smart technology to monitor usage patterns, providing insights that help in maintaining efficiency and reducing waste.

For those seeking a combination of power and efficiency, the MX-14AA is an outstanding choice. This model boasts high output capabilities, making it ideal for large-scale operations. It is constructed with advanced materials that enhance heat retention, ensuring that it meets the demands of high-traffic environments. Furthermore, the MX-14AA features an intuitive interface that simplifies operation and minimizes training time.

Lastly, the MX-14-2E is engineered for robust performance with a focus on user-friendly design. It comes with dual controls that allow for independent operation, making it perfect for multitasking. The MX-14-2E also benefits from intelligent diagnostic systems that help detect maintenance needs before they become problems, ensuring longevity and reliability.

In summary, the Anetsberger Brothers MX series represents the pinnacle of engineering excellence, combining advanced features with practical usability. Each model is tailored to meet the diverse needs of users while promoting efficiency, sustainability, and ease of operation, making them a valuable addition to any professional setting.
Top Page Image Contents