InfraStruXure Site Planning, Installation, Start-Up 1
Safety

Overview

Save these instructions

This manual contains important instructions that must be followed during installation, operation, and
maintenance of the InfraStruXure System.

Safety symbols used in this manual

Cross-reference symbols used in this manual

Indicates an electrical hazard, which, if not avoided, could result in injury or
death.
Indicates a hazard, which, if not avoided, could result in personal injury or
damage to product or other property.
Indicates a potential hazard which could result in damage to product or other property.
Indicates important information.
Indicates a heavy load that should not be lifted without assistance.
Indicates a standby state. When in standby, the unit is not operating, but it may still
contain hazardous voltage. It is not safe to service until the equipment is
disconnected from all sources of electrical power.
S
ee also
Indicates that more information is available on the same subject in a different manual.
Indicates that more information is available on the same subject in a different section
of this manual.