Installation Procedures: Connect the Power Source to the PDU

2.Create an appropriately-sized hole in the gland plate for the conduit.

The input gland plate has two knock-outs. Use either as starter hole for creating a hole for your conduit. Use a knock-out punch to create a larger hole.

3.Re-attach the gland plate.

4.Install a lock-nut and bushing to the conduit.

5.Thread the conduit through the hole.

14

InfraStruXure Site Planning, Installation, Start-Up

Page 22
Image 22
APC Power Supply manual Installation Procedures Connect the Power Source to the PDU