Additional Procedures | Adjusting the Degaussing Coils - 3 | |
| 1 At the top two corners of |
|
| the CRT, release the | |
| degaussing coil from the | |
| two bendable tabs. | |
| 2 Lower the degaussing | |
| coil so its top corners | |
| are positioned at least 2 | |
| inches (50 mm) away | |
| from the CRT corner | |
| screws. Bend the tabs to | |
| secure the degaussing | |
| coil in this position. | |
