
|
| Troubleshooting |
| Symptom Charts/No Raster (Continued) - 6 | |
|
|
| No Raster (Continued) |
| |
|
|
| |||
No raster with LED off | 1 | Ensure that power cord is plugged in properly. | |||
|
|
| 2 | Check power outlet at the wall by plugging in an | |
|
|
| 3 | electronic device that works. | |
|
|
| If the display is plugged into a computer, ensure that | ||
|
|
| 4 | computer is on and power cord firmly connected. | |
|
|
| Check video cable connections at computer and monitor. | ||
|
|
|
| Thumbscrews must be secure. If a video card is used, the | |
|
|
| 5 | video cable must be properly connected to it. | |
|
|
| Replace video and main deflection boards. See “Main | ||
|
|
|
| Deflection, CRT/Video Boards and Rear Fence” in Take | |
|
|
|
| Apart. Adjust cutoff and white balance. See “Cutoff and | |
|
|
| 6 | White Balance” in Adjustments. | |
|
|
| Send the monitor to Apple for repair. |